AI for Welders: What to Try, What It Costs, and What Stays Yours
Welders rank 23 out of 100 for how much AI can do in the job. The weld stays with you. The studying, the math, and the paperwork are where AI helps. Here is what to try, what it costs, and a four-weekend plan.
How Welders Can Use AI Today
A welder's week. Higher means you do it more often. Further right means AI can do more of it. Start in the top right.
- Cert test prep. A tutor that never gets tired of your questions. (AI does it)
- Job notes and logs. Say what you did and let it write the log. (AI does it)
- Resume and job search. Your work is the story. It helps you tell it. (AI does it)
- Material lists. It builds the list. You check the counts. (AI does it)
- Settings lookup. A starting point. Your test piece has the last word. (AI helps)
- Reading prints and weld symbols. It explains a symbol. You check it against the print. (AI helps)
- Troubleshooting welds. A second opinion on a bad bead. (AI helps)
- Fab math. It shows the steps. You check them. (AI helps)
- Lay the bead. Your hands do this. (You do it)
- Fit and tack. Your eye does this. AI can plan the order. (You do it)
- Grind and finish. Nobody is handing this off. (You do it)
- Safety checks. This one is yours. (You do it)
Where this comes from. Where each task sits is my estimate, guided by Microsoft Research's study of how people use AI at work.
12 AI Prompts for Welders
Copy any of these into ChatGPT, Claude, Gemini, or Grok.
- Cert test prep. Quiz me for a structural welding test the way an examiner would. Explain every answer I miss.
- Job notes and logs. Here are my voice notes from today's welds. Turn them into a clean log with the joint, the process, the settings, and anything I flagged.
- Resume and job search. Here is my work history and my certifications. Write a one-page resume for a pipe welding job in plain words.
- Material lists. I'm building this frame from 2 inch square tube. Here are the sizes. Make a cut list and tell me how many sticks to order.
- Settings lookup. Give me starting settings for MIG welding quarter inch mild steel with this wire size. Tell me what to change if the bead sits too tall.
- Reading prints and weld symbols. Explain this weld symbol in plain words and tell me what the finished weld should look like. Then I'll describe the symbol.
- Troubleshooting welds. My welds on this joint show small holes and a lot of spatter. List the likely causes in order and how to test each one.
- Fab math. I need to roll a cone from flat plate with these top and bottom sizes. Walk me through the layout math step by step.
- Lay the bead. Give me three drills to steady my hand on overhead welds.
- Fit and tack. Here is the part. What order should I tack it in to keep it from pulling out of square?
- Grind and finish. What is the fastest safe way to blend this weld flush without thinning the plate?
- Safety checks. Quiz me on hot work safety and fume control the way a safety trainer would.
Will AI Replace Welders?
Welders rank 23 out of 100 for how much AI can do in the job. 100 is the most. The government expects 2% more jobs by 2035.
- Roofers: 2 out of 100 for how much AI can do
- Carpenters: 15 out of 100 for how much AI can do
- Welders: 23 out of 100 for how much AI can do
- Nurses: 42 out of 100 for how much AI can do
- Electricians: 53 out of 100 for how much AI can do
- Accountants: 68 out of 100 for how much AI can do
- Software developers: 85 out of 100 for how much AI can do
- Writers: 100 out of 100 for how much AI can do
AI Tools for Welders and What They Cost
Switch things on and off and watch the total. Prices checked November 19, 2026. No affiliate links.
Not ready to pay? See every free way in →
- One paid assistant ($20 a month). ChatGPT Plus and Claude Pro list at $20, and Google AI Pro lists at $19.99. Grok Premium lists at $30, with a Plus tier at $8. Pick one and use it by voice and camera.
- Your phone's microphone and camera ($0). Talk instead of typing. Take a photo when words are slow.
- A notes folder you own ($0). Your checklists, templates, and study notes in one place the assistant can read.
- A second assistant ($20 a month). Run the same question through two models when the answer matters. Leave it off until you need it.
How to Start Using AI as a Welder in Four Weekends
Using it once or twice and failing doesn't count. It takes practice and it takes time.
You can do weekend 1 for $0. See every free way in →
Weekend 1: Talk to It ($0 to $20)
This weekend, try job notes and logs. Here are my voice notes from today's welds. Turn them into a clean log with the joint, the process, the settings, and anything I flagged.
- Put one assistant on your phone's home screen. A free plan works for this weekend.
- Say the prompt above out loud for a real one from this week.
- Ask it something you already know the answer to and see if it gets it right.
- Do ten things from your own week before Sunday night.
By Sunday night. You know what it is good at and where it gets things wrong. From my post Agency Beats Intelligence.
Weekend 2: Give It Your Job ($0)
This weekend, try material lists. I'm building this frame from 2 inch square tube. Here are the sizes. Make a cut list and tell me how many sticks to order.
- Start one project in the assistant for your work.
- Add the processes you run, the metals you weld, your certifications, and your shop's procedures.
- Tell it to interview you. Ask for 25 questions about how you work and answer them out loud.
- Run the prompt above again. The answer should fit you this time.
By Sunday night. The assistant knows how you work, so its answers fit. From my post The Second Brain Finally Works.
Weekend 3: Save What Works ($0)
This weekend, try settings lookup. Give me starting settings for MIG welding quarter inch mild steel with this wire size. Tell me what to change if the bead sits too tall.
- Run the prompt above. Fix what it got wrong and tell it why.
- Save it as its own instruction so you never type it twice.
- Save the prompts from weekends 1 and 2 the same way.
- Use all three for a week and fix what annoys you.
By Sunday night. Three saved helpers you use every week. From my post How to Choose AI Projects Wisely.
Weekend 4: Make It a Habit ($0)
This weekend, try reading prints and weld symbols. Explain this weld symbol in plain words and tell me what the finished weld should look like. Then I'll describe the symbol.
- Run the prompt above.
- Pick the helper that saved you the most time. Use it every day this week.
- Show one coworker what you built and where it got things wrong.
- Write down what you will never hand to AI, and why.
By Sunday night. AI is part of your week, and you know where your line is. From my post The Broken Pool Cue.
Check its work every time on settings, code rules, and anything tied to safety. It will be wrong sometimes and it will sound sure when it is. I wrote about why in The 1% Problem of AI Errors.
My Read on AI for Welders
Being entrepreneurial is a mindset, and that agency and urgency mindset is what's really going to win the day. It does require trying these things out, and using it once or twice and failing doesn't count. If you have kids, you know what I'm talking about. They can't throw, can't catch, can't bat. At first it takes practice and it takes time. This is a good starting place, with the guide as a coach.
It doesn't matter how old you are when you start with this. I wrote in It's Not the Age You Start, It's Just That You Start that someone who begins at 50 gets to the same place as someone who begins at 27, and they get there fast. I think that's good news for anybody in a trade who feels late.
No model is going to lay a bead. What it can do is quiz you for the next cert at midnight and explain a weld symbol as many times as you ask. I'd use it as a tutor first.
Questions Welders Ask About AI
Will AI replace welders?
Not by this data. Welders rank 23 out of 100 for how much AI can do, so most of the work still needs a person. The government expects 2% more jobs by 2035.
What can welders use AI for today?
Start with cert test prep, job notes and logs, and resume and job search. Then try settings lookup and reading prints and weld symbols, and check the work yourself.
What does it cost to start?
About $20 a month for one paid assistant. You can start for $0 on a free plan.
How long does it take to get started?
Four weekends. Each one has one task to try and four steps, and the page keeps track of what you finish.
What are good AI prompts for welders?
This page has 12 you can copy. Start with cert test prep, job notes and logs, and resume and job search.
Can welders start using AI for free?
Yes. The free plans from ChatGPT, Claude, Gemini, Grok, and Copilot are enough for the first weekend. A paid plan at about $20 a month lets you do more.
Sources and Method
What the research says
Microsoft studied how people use its AI helper, Copilot. Then it scored 785 jobs on how much of each job AI can do. Welders rank 23 out of 100, where 100 is the most.
Where each task sits on the map is my own estimate. I placed each one by how often it comes up and how much of it an AI assistant can do today.
The government counted 437,700 jobs for welders in 2025. Half of them earned more than $53,750 a year. It expects 2% more jobs by 2035.
Sources
- Microsoft Research, Working with AI: Measuring the Applicability of Generative AI to Occupations, data release v1.1
- Bureau of Labor Statistics, Employment Projections, Table 1.2: Occupational projections, 2025 to 2035, and worker characteristics, 2025
- Assistant plan prices, AI Business Weekly pricing index, November 2026
Method and limits
The rank is where the job falls among the 785 jobs Microsoft scored. Where each task sits on the map is my best estimate, guided by Microsoft's data. A high rank means AI can do more of the tasks. It does not mean the job goes away. The 'where it's heading' view is a guess at direction, with no date on it. Last checked November 19, 2026.
Know a welder?
Send them this. It takes four weekends, and they can start for $0.